Advantech USC-360 - Page 45

39 USC-360 User Manual
Chapter 2 System Setup
2.5.2.1.1.1 Use QR code to join Wi-Fi
 Scroll down the list of saved Wi-Fi and click.
 Click the (QR code icon ).
 Place the viewfinder on the QR code of the other device.
2.5.2.1.1.2 Use QR code to join shared Wi-Fi
 Click Setting icon of the connected device
 Click share icon
2.5.2.1.1.3 Disconnect from the connected wireless network
 Click the Setting icon of the connected device
 Click the Forget icon to disconnect wireless network
2.5.2.1.2 Ethernet LAN (Gigabit)
 Connect the Ethernet cable
 Default Ethernet
2.5.2.1.3 Flight Mode
 This mode disables all wireless transmission functions. Including cellular, Wi-Fi
and Bluetooth.
 To enable it, click Airplane Mode icon .
2.5.2.1.4 USB Network Sharing
 This feature is used to share an Internet connection with other devices via a
USB cable.
 Click on Hotspot and Network sharing.
 Click USB Network Sharing icon to enable it
2.5.2.1.5 Bluetooth Network Sharing
 This feature is used to share an Internet connection with other devices via Blue-
tooth.
Click on Hotspot and Network sharing.