USC-360 User Manual 40
To enable it, click on Bluetooth Network Sharing icon .
2.5.2.1.6 Ethernet Network Sharing
This function is used to share the Internet connection with other devices through
network cables.
To enable it, click on Bluetooth Network Sharing icon .
2.5.2.1.7 Data Save mode
If the Internet connection is established through a billing device, you can use
this function to save data.
Click Data Save mode.
To enable it, click Use Save Mode icon .
2.5.2.2 Connected Device
2.5.2.2.1 USB
Click on USB.
Under "USB Usage" in USB Preferences, select and click the function you want
to enable.
File Transfer - This function will share internal memory and SD memory.
USB Network Sharing - This function will share the Internet connection.
PTP - Image transfer protocol.
No data transfer - (default setting) No data is transferred even if a USB cable is
connected
Note! To activate USB Settings, you must first connect the USB cable to
another device or PC. When an external computer is detected, the
device will appear in the USB Preferences Settings.
To Next Page
Loading...