41 USC-360 User Manual
Chapter 2 System Setup
2.5.2.2.2 Bluetooth
Click to pair with a new device.
In the Available Devices screen, choose a device to pair.
A request message appears when pairing.
Verify that the matching number is the same.
If the pairing process requires a PIN, enter it.
Click Pair to connect.
Once the Bluetooth device is successfully connected, the connection will show
‘Active’ or ‘Connected’.
2.5.2.2.2.1 Disconnect paired Bluetooth Device
Return to the ‘Connected Devices’ screen from available media devices or pre-
viously connected devices.
Click Settings icon of the connected devices.
Note! Make sure the Bluetooth device is turned on and searchable.
To Next Page
Loading...