USC-360 User Manual 42
In the Settings icon menu, you can disconnect, forget (unpair devices),
enable / disable phone calls or media audio or contact sharing.
2.5.2.2.3 Projection Screen
2.5.2.2.3.1 Connect wireless display devices
Click Connection Preferences.
Click "Projection".
Click on the 3-point menu.
Click Enable Wireless Display to start scanning compatible display devices.
Click a wireless display device (such as a TV) in the list. In the wireless display
device (TV), click Allow (if system prompted).
Note! Ensure that devices with wireless display capabilities are connected to
the same wireless network
To Next Page
Loading...