Networking Your Printer
7 adventprintersupport.custhelp.com
Using the LCD keyboard
When you need to enter letters or numbers, a keyboard appears on the LCD.
Setting up an IP Address
IMPORTANT: You should only need to set up an IP Address for your printer if you are
having a problem with connecting to your network. Typically, it is not
necessary to set up an IP Address. This procedure is for advanced users who
know how to obtain the IP Address for the printer.
To set up your IP Address on the printer:
1. Press .
2. Press to select Network Settings, then press OK.
3. Press to select Advanced IP Address Setup, then press OK.
4. Press OK again to continue.
5. Select one of the following, then press OK:
• Dynamic (DHCP)
• Manual (Static)
6. If you selected Manual (Static), you are prompted to enter an IP Address,
a
Subnet Mask, a Gateway Address and a DNS Server address. Press OK after
each entry. Use the navigation buttons to enter each digit.
Consult your internet service provider or network administrator for more
information.
On the control panel, press , , or to select the
letters and numbers, using the correct uppercase and
lowercase letters. Press OK after each character. When you
have finished, select DONE, then press OK.
To Next Page
Need help?
General
