Advent Touch Print All-in-One Printer User Manual

Networking Your Printer
9 adventprintersupport.custhelp.com
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the ADVENT
All-in-One Printer Software on each computer.
1. Go to adventprintersupport.custhelp.com/app/go/aiodownloads.
2. In the search results, click the link for your operating system.
3. Follow the on-screen instructions.
Connecting to another ADVENT All-in-One Printer
If you are connecting to a newer model printer (for example, you have an AW10
Printer and now you are adding a Touch Print Printer), you must install the software
for the newer model.
NOTE: When you install the new software, the printer driver for the AW10 Printer
will be uninstalled, and an upgraded driver for the AW10 Printer will be
installed in addition to the driver for the Touch Print Printer.
On a computer with WINDOWS OS:
1. Select Start > All Programs > Advent > ADVENT Printer Setup Utility.
• If your wireless printer (example: AdventTouchPrint+0034) is not listed:
a. Select No, my printer is not listed, then click Next.
b. From the drop-down list, select your printer, then click Next.
c. Select Network - Wireless / Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless printer (example: AdventTouchPrint+0034) is listed:
a. Select the printer that is connected to your network, then click Next.
b. Select Yes, my printer is listed, then click Next.
2. When driver installation is complete, click Done.
On a computer with MAC OS:
1. Select Apple > System Preferences.
2. Under Hardware, select Print & Fax or Print & Scan.
3. Click + in the dialog box.
4. Select your printer from the list.
5. Click Add, if required.

Advent Touch Print All-in-One Printer Specifications

General

Brand	Advent
Model	Touch Print All-in-One Printer
Category	All in One Printer
Language	English