Advocate Redi-Code+ BMB-EA001 - Page 34

Possibility of contact with blood for all parts of meters
Part
A
B
C
D
E
Name of the Part
Lancing device cap
Clear cap
Main body of the device
Adjustable tip
Lancet ejector
Possibility of contact with blood
High
High
Low
Low
Low
Do
▪ Make sure the meter is turned off during cleaning and disinfection.
▪ Keep the test strip vial tightly closed when performing the cleaning and disinfection procedures
because the fumes from the disinfectant may affect the performance of the strip.
▪ After cleaning or disinfection, please perform the physical appearance and performance check
of devices.
Do Not
▪ Get any moisture in the test strip slot.
▪ Spray any cleaning solution directly onto the meter.
▪ Put the meter under water or liquid.
▪ Pour liquid into the meter.
34