If the Wi-Fi function is enabled, the Wi-Fi icon " " will appear
on the top of the screen.
Do not perform any key operation when waiting the Wi-Fi
function to be enabled or disabled.
2. Turn on your camera,wait until the blue Wi-Fi indicator
flashes slowly. Search for Wi-Fi hot spot on a mobile
receiving device,select "AEE Magicam" network and
connect it (default password: AEE12345). Then the camera
and the mobile device are connected.
3. Click the App icon "
" on the mobile device to display
the icon " " shown in Fig. 1. Enter the interface shown
in Fig. 2 to remotely view your camera’s screen and set up
parameters.
In case of Wi-Fi connection failure, the icon "
" will appear. Select "Yes" to try to connect again. If you
select "No", click the icon "
" to enter the WLAN
settings interface or click the icon "
"
to enter the main interface to view local files only(Only
Android version), no other operation is supported).
To Next Page
Loading...
