Switch-mode power supply AC2000 N1 / DC2000 N1 / AC3000 N1 / DC3000 N1 - Operating instructions
80001533 EFE en Page 5 of 41
1. SAFETY REGULATIONS
This chapter provides guidance on all safety-related issues. All safety
measures, safety equipment and residual hazards of the appliance are
described. Read this chapter carefully before carrying out any work on
the appliance.
1.1 Information symbols
This section explains which symbols are used in the operating
instructions.
Icon Meaning
i
Notes are marked with a blue "i". They contain important
information on the life phases of the system.
Environmental regulations are highlighted with a dustbin.
Environmental regulations are references to government
regulations that must be observed, particularly when
disposing of operating materials.
Table 1 - Information symbols in the operating instructions
1.2 Appropriate use
Intended use
Typical applications include use as a mains power supply or as a
secure power supply with a battery connected in parallel.
Any other use or modification is not in accordance with the intended
use. Persons may be injured or killed if the device is used for purposes
other than those for which it is intended.
Unauthorized modifications, manipulations and changes to the system
and its safety equipment are not permitted without the manufacturer's
approval. Any resulting damage is excluded from liability.
Plant safety
The system is safe to operate if the operating instructions, the
operating and system-specific specifications and the regulations of the
employers' liability insurance association are observed.
Installation site
The system may only be installed in rooms with restricted access. The
ambient conditions must be dry and frost-free.
To Next Page