EasyManua.ls Logo

AEG AC2000 N1 - Duties of the Transport Personnel; Type Plate

AEG AC2000 N1
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Switch-mode power supply AC2000 N1 / DC2000 N1 / AC3000 N1 / DC3000 N1 - Operating instructions
80001533 EFE en Page 8 of 41
1.6 Duties of the transport personnel
Observe the following safety instructions during transportation.
Read the operating instructions. Memorize the safety regulations.
Observe the regulations:
BGV D8 (winches, lifting and pulling devices)
BGV D27 (Industrial trucks)
Use the personal protective equipment (PPE) as intended.
Check that the PPE is in good condition and report any defects to the
operator.
Report any transport damage to the system to the operator.
1.7 Type plate
You will find information on the type plate:
Series (head)
Type
Input/Output
Type of current
Nominal frequency
Nominal voltage
Rated current
Year of construction
CNF no.
Serial no. (device number)
CE mark
Example of a nameplate:
Illustration 1: Example nameplate.

Table of Contents