AEG BE7900061M - BEFORE OPERATING YOUR APPLIANCE FOR THE FIRST TIME; Setting the Time of Day; Initial Appliance Preparation and Run-in

8
BEFORE OPERATING YOUR APPLIANCE
FOR THE FIRST TIME
Setting the time
The model you have purchased is fitted with a
programmable timer. You MUST set the time of day
before you can operate the appliance.
Programmable Controller:
• Aftertheappliancehasbeenelectricallyconnected,
the set clock symbol
will flash on the clock
display.
• Tosetthetimeofday,press–or+.5secondsafter
the last change the timer arrow
will disappear,
confirming the time has been set. Once the time has
been entered, the clock advances minute by minute.
NOTE: The clock has a 24-hour display.
Preparing your appliance for the
first time
• Pleaseremoveallinternalboxesandbagsfromthe
oven before operation.
• Pleasewipeouttheoveninteriorpriortooperation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the
oven is completely dry.
• Newappliancescanhaveanodourduringfirst
operation. It is recommended to ‘run in’ your oven
before you cook for the first time. Run the oven at
180ºC for 2-4 hours and ensure that the room is
well ventilated.
• DONOTlinetheovenwithfoil,itwilldamage
the enamel.