AEG BE7900061M - INSTALLING YOUR OVEN ACCESSORIES; Catalytic Liner Installation; Side Rack and Shelf Installation

9
INSTALLING YOUR OVEN ACCESSORIES
Prior to installing accessories, remove all
packaging and remove plastic film from
external panels
Catalytic liners
Catalytic liners are coated with a specially formulated
enamel coating. This porous coating enables the “self
cleaning” process – see Cleaning your appliance
section for more details. Catalytic liners must be
installed first but you can omit them, if you wish, with
no effect to cooking performance. Their sole purpose is
to make oven cleaning easier.
• Thecatalyticlinerswillattachtoeachsideofyour
oven. There will be a left hand and right hand
version. This is marked on the panel.
• Positionthefirstlinerasperthediagram.Theblack,
shiny side of the liner should be facing the oven
wall, the hooks pointing down and the word ‘LH’
positioned to the top rear portion of the oven. The
right hand side will be a mirror image of this.
• Linethehooksupwiththeslotsprovidedinthe
oven wall, push them in and then allow the liner to
slide down to its final position.
• Theaccessholeforthesideracksshouldbevisible
when the liner is correctly positioned – see diagram.
Side racks
The side racks that come with your oven are fitted in
the following manner
• Insertthe2rearpegsintotheholesprovided.
• Locatethefrontpegintothefrontaccessholeand
push in firmly.
Shelves and trays
The shelves are designed so that they have maximum
travel but cannot be accidentally pulled right out. The
trays are designed in the same way and fit straight into
the side racks.
• Locatetherearedgeoftheshelf/trayinbetween
2 guide rails of the side rack – see diagram. Ensure
the same rail positions on both sides of the oven are
being engaged.
• Withthefrontedgeraised,begintoslidetheshelf
into the oven.
• Oncetheindentshavepassedthefrontedgeofthe
side rack, the shelf can be pushed completely in.
• Whenfullyinsertedtheshelf/trayshouldnot
interfere with the closed door.
To fit a shelf or try to telescopic sides:
1. With the slides fully pushed in, push the shelf or tray
along the top of the slide until it hits the back post.
2. Drop the front of the shelf or tray onto the slide
ensuring it sits behind the front post of the slide.
When fully inserted the shelf / tray should not
interfere with the closed oven door.