To Next Page

To Previous Page

Go to Logger | Download Log

If there are logs saved on the dash, a list similar to the one below will be presented. Select the files to download.

Choose whether to erase the files from the dash or not.

Setting the Internal Clock

Connect the color display to your PC using the USB link..

Select Tools | Set Time and Date in Display.

The system will synchronize the time and date to match the PC.

Updating Dash Firmware

As part of the continuing development process, from time to time new versions of the AEM Dash firmware will be

released with new DashDesign installers. To upload the new firmware:

Firmware files are installed to the \Documents\AEM\DashDesign\Firmware folder.

Connect the color display to your PC using the USB link..

Select Tools | Upload Firmware. Select the firmware (.bin) file from the location above.

The upload process starts. Do not switch the display off during the upload process as this may corrupt the

firmware.

Once the upload process has finished, unplug the USB cable to reboot the display.

Questions and Answers:

Need help?

Do you have a question about the AEM CD-7 and is the answer not in the manual?

AEM CD-7 Specifications

General