AEMC 4500 - Repair and Calibration; Technical and Sales Assistance

Digital Ground Resistance Tester Model 4500 43
Repair and Calibration
Toensurethatyourinstrumentmeetsfactoryspecications,werecommend
that it be scheduled back to our factory Service Center at one-year intervals
for recalibration, or as required by other standards or internal procedures.
For instrument repair and calibration:
You must contact our Service Center for a Customer Service Authorization
Number(CSA#).Thiswillensurethatwhenyourinstrumentarrives,itwillbe
tracked and processed promptly. Please write the CSA# on the outside of the
shipping container. If the instrument is returned for calibration, we need to
know if you want a standard calibration, or a calibration traceable to N.I.S.T.
(Includescalibrationcerticateplusrecordedcalibrationdata).
Ship To: ChauvinArnoux
®
, Inc. d.b.a. AEMC
®
Instruments
15 Faraday Drive
Dover, NH 03820 USA
Phone:(800)945-2362(Ext.360)
(603)749-6434(Ext.360)
Fax: (603)742-2346or(603)749-6309
E-mail: repair@aemc.com
(Orcontactyourauthorizeddistributor)
Costs for repair, standard calibration, and calibration traceable to N.I.S.T. are
available.
NOTE: You must obtain a CSA# before returning any instrument.
Technical and Sales Assistance
If you are experiencing any technical problems, or require any assistance
withtheproperoperationorapplicationofyourinstrument,pleasecall,faxor
e-mail our technical support team:
ChauvinArnoux
®
, Inc. d.b.a. AEMC
®
Instruments
Phone:(800)945-2362 (Ext. 351)
(603)749-6434 (Ext. 351)
Fax: (603)742-2346
E-mail: techsupport@aemc.com
Contact: