Micro-Ohmmeter Model 5600
Receiving Your Shipment
Upon receiving your shipment, be sure that the contents are consistent
with the packing list. Notify your distributor of any missing items. If the
equipment appears to be damaged, file a claim immediately with the
carrier and notify your distributor with a detailed description of any
damage. Save the damaged packing container to substantiate your claim.
Packaging
The Model 5600 Micro-Ohmmeter (Cat. #1431.01) is supplied with a
power supply lead, hex wrench, and user manual.
Accessories and Replacement Parts
Kelvin probes, set of two, on 10 ft color-coded leads with
banana plug terminations.....................................................Cat. #1017.82
Kelvin clips, 1A, set of two, on 10 ft color-coded leads
with banana plug terminations .............................................Cat. #1017.83
Kelvin clips, 10A, set of two, on 10 ft color-coded leads
with spade lug terminations..................................................Cat. #1017.84
Fuse, set of 10, 8A, 1¼ x 1/4" fast blow...............................Cat. #2970.13
Battery 6V, 7 Ah rechargeable NiCad..................................Cat. #2960.12
Soft carrying bag for accessories.........................................Cat. #2119.83
Kelvin Probes 20 ft spring loaded ........................................Cat. #2118.52
Description
The Model 5600 performs reliable low resistance measurements with
test currents to 10A and resolution to one micro-ohm.
The front end of the Model 5600 employs a four-wire Kelvin
configuration, which eliminates test lead resistance for a
measurement accuracy of 0.25%. A reverse polarity switch
compensates for the effect of DC voltage interference on the accuracy
and permits reading averaging. A built-in circuit filters against AC
signals.
- 4 -
To Next Page
Loading...
Need help?
General
