Aeotec 7 Pro - Version; Association Group Info; Notification

AEOTEC User Manual
Page 8
4.6 Version
Parameter
Value
Z-Wave Protocol Library Type
0x03
Z-Wave Protocol Version
0x07
Z-Wave Protocol Sub Version
0x0E
Firmware 0 Version
0x02 [Z-Wave Chip Firmware Version]
Firmware 0 Sub Version
0x00 [Z-Wave Chip Firmware Sub Version]
Hardware Version
0x01
Number of firmware targets
0x00
4.7 Association Group Info
Root product
ID
Name
Node count
Profile
Function
1
Lifeline
5
General: Lifeline
(0x0001)
Product Reset Locally Notification:
Issued when Factory Reset is performed.
Battery Report:
Issued when battery becomes low.
Sensor Binary Report:
Issued when water leakage state is changed.
Multilevel Sensor Report
Issued when button pressed to wake up or auto report enable or
detect temperature/humidity change exceeds the set value.
Notification Report [Type=0x06; Event=0x16]:
Issued when sensor state is changed to be Open Status.
Notification Report [Type=0x06; Event=0x17]:
Issued when sensor state is changed to be Close Status.
Notification Report [Type=0x07; Event=0x03]:
Issued when tamper is tripped.
2
control
5
Notification: water
alarm
(0x2001)
Basic Set:
Issured when water leak detected/or not.
3
Alarm
5
Notification:water
alarm (0x7105)
Notification Report:
Sends out alarm message when water leakage is detected.
4
Tamper
5
Notification:home
Security (0x7107)
Notification Report:
Sends alarm messages when tamper is tripped.
4.8 Notification
Notification Type
Notification Events/State
Description
Home Security
0x07
Tampering, product cover removed
0x03
Issured when product cover removed
Idle
0x00
Power Management
0x08
Replace battery now
0x0B
Issued when the battery power lower
than 20%.
Idle
0x00
Issured when replace new battery that
battery power more than 90%.
Water Alarm
0x05
Water leak detected
0x02
Issured when water probe detected
water.
Idle
0x00
Issured when water probe does not
detect water.