Aeotec 7 Pro - Specifications; Structural; Hardware; Software

AEOTEC User Manual
Page 2
2 SPECIFICATIONS
2.1 Structural
Parameter
Value
Product Identifier
ZWA019
Dimensions
28x95x35mm
Weight
Main Part: 20g Water Probe: 3g
Color
White
Usage
For indoor use.
Operating Temperature
32~104°F (0~40°C)
Relative Humidity
8%~80%
2.2 Hardware
Parameter
Value
Z-Wave Module
ZGM130S
Z-Wave TX Power
Max: 13dBm
Z-Wave Antenna Distance
40m (Indoor) /150m (Outdoor)
Indicator Light Color
Green, Red
Buttons and Connectors
Tamper Button (x1), Water Detecting Head(x1)
Input Voltage
3.0V Lithium battery
Battery Type
1*1/2AA
Battery Included
Yes. 1pcs battery included.
Battery Required
Yes. 1pcs battery required.
Battery Info
Model: ER14250 1/2AA
Capacity: 1200mAh
Detachable: Yes
Chargeable: No
Endurance: 2 years
Working Current
30mA
Standby Current
5uA
Maximum Standby
Power Consumption
0.03mW
Maximum transmission
5mW
Built-in Sensors
Humidity Temperature Sensor
2.3 Software
Parameter
Value
Wireless Technology
Z-Wave
Certification Type
Z-Wave Plus v2 Certification
Z-Wave SDK Version
7.15.4
Z-Wave Library Type
Enhanced 232 Slave
Z-Wave Role Type
Reporting Sleeping Slave[0x06]
Generic Product Type
GENERIC_TYPE_SENSOR_NOTIFICATION [0x07]
Specific Product Type
SPECIFIC_TYPE_NOTIFICATION_SENSOR [0x01]
Security Class
Non-Security, S2 Unauthenticated, and S2 Authenticated
SmartStart Compatible
Support. After powering on, SmartStart is auto activated.
Over The Air (OTA)
Support. Firmware can be updated via RF.
Multi Channel Product
No