P
h
i
l did it!
(6) Power ON
NOTE: For the first time please remove the propeller to avoid injuries.
After Power-On the aircraft needs to be motionless for the initial stage to be completed.
This process can take up to 10 seconds.
When the initial stage is completed the sound of the ESC can be heard.
LED Status Indication
The RED LED is showing the status of the GPS
The GREEN LED is showing the Control Mode that the User has selected.
Mode Green LED Red LED Instructions
(2) Manual OFF
Flashes
GPS not connected
(1) Stabilisation ON
NO GPS
Att / Alt Mode
Flash
GPS is connected but the accuracy
is not sufficient
(3) Stabilisation ON
GPS ON
Att / Alt /Fence Mode
Constant ON Constant ON GPS Connected satisfactorily
12 of 21
To Next Page
Loading...