Aeritech NB ONE+ - User Manual

Need help?

Do you have a question about the Aeritech NB ONE+ and is the answer not in the manual?

Aeritech NB ONE+ Specifications

General

Brand	Aeritech
Model	NB ONE+
Category	GPS
Language	English

Summary

Product characteristics

Description

(1) Dip Switches

Explains using dip switches to select aircraft type and servo direction.

(2) Servo connections

Details connecting servos to output ports and GPS antenna.

(3) Remote Control Receiver Wiring

Covers PWM receiver setup and connecting receiver to flight controller.

(4) Flight Controller Installation

Instructions on mounting the flight controller horizontally with arrow pointing forward.

(5) Potis S and R

Explains the function of 'S' and 'R' potentiometers for sensitivity and fence radius.

(6) Power ON

Guide on powering on, safety precautions, and LED status indications.

Calibration of Neutral Point in RemoteControl

(7) Servo Direction Setting - RemoteController

How to check and set servo directions in Manual Mode using the RemoteController.

(8) Servo Direction Setting - FlightController

How to adjust servo directions using DIP switches 3-5 in Automatic Modes.

Flight Modes

1) Fixed Height Mode - Attitude; Altitude Hold - Aquire Mode

Describes modes for level flight, altitude hold, and semi-automatic take-off.

2.) Manual Mode

Explains full manual control without flight controller interference.

3.) Fenced Mode (GPS)

Details flying within a radius, automatic return, and circling.