EN
11_11. 6755532_02
Reply Operations to be performed
The unit is a cooling only model
Fan coils or
low temperature radiators
Reply Operations to be performed
Not installed
Installed
Set the parameter
from:
• Season control piloted from the circuit board
• ON/OFF control enabled from PR3
• Season control enabled from PR3
• ON/OFF control from panel on machine
:
• Season control enabled from PR3
• ON/OFF control enabled from PR3
Not envisioned
Envisioned
Reply Operations to be performed
Not envisioned
Envisioned
Set the parameter with the appropriate value (in sec
-
Reply Operations to be performed
Not installed
Installed
This parameter enables a digital clamp ID (indicated on the circuit board with the code
Set the parameter
from:
Clamp ENABLED
Clamp DISABLED
Remember that the OPEN state on the clamp represents:
• the compressors and resistances block function if the parameter is set at 1
• the compressors, pumps and resistances block function if the parameter is set at 2
is set at the value 3
To Next Page
Loading...
