AERMEC ANKI 045 - Configurator; Accessories

26
CONFIGURATOR
ACCESSORIES
MOD485K: RS-485 simplied interface for supervision systems with MODBUS pro-
tocol.
PGD1: Allows you to control the unit at a distance.
PR3: Simplied remote panel. This makes it possible to carry out the unit's basic
controls with the signalling of alarms. Can be made remote with shielded cable up
to 150 m.
VT: Antivibration supports
BDX: Condensate drip.
FACTORY FITTED ACCESSORIES
KR: Anti-freeze electric heater for the plate heat exchanger.
Field Description
1,2,3,4 ANKI
5,6,7
Size
020, 025, 040, 045
8 Model
H Heat pump
9 Version
° Standard
X With inverter pump
10 Heat recovery
° Without heat recovery
11 Coils
° Copper-aluminium
V Copper-painted alumimium
12 Fans
J Inverter
13 Operating eld
° Electronic thermostatic valve (1)
14 Evaporator
° Standard
15 Power supply
5 230V ~1 / 60Hz
16 Field for future development
(1) Water produced up to 17.6 °F
COMPATIBILITY OF ACCESSORIES
Model Ver 020 025 040 045
MOD485K °,X • • • •
PGD1 °,X • • • •
PR3 °,X • • • •
Antivibration
Ver 020 025 040 045
°,X VT9 VT9 VT9 VT9
Ver 020 025 040 045
°,X BDX30 BDX30 BDX30 BDX30
Condensate drip
Anti-freeze electric heater
Ver 020 025 040 045
°,X KR2 KR2 KR2 KR2
A grey background indicates the accessory must be assembled in the factory