AERMEC FMT 10 User Manual

8
English
USEUSE
1 - GREEN INDICATOR LIGHT
The green indicator light shown that the panel is being
powered
2 - TEMPERATURE REGULATION
Knob for setting the room temperature (10°C÷30°C)
3 - SWITCHING ON AND OFF
Allows you to switch the fan coil on or off
4 - FAN SPEED
Allows you to set the ventilation speed of the fan coil (low,
medium or high)
SWITCHING ON AND OFF
Move the cursor OFF-ON to switch the fan coil on or off.
For correct working, before switching the fan coil on, check that water is
circulating in the system at a suitable temperature for the working mode
you have selected.
In particular, check that, in winter functioning, the heat pump or boiler is
switched on, and in summer functioning, the c
hiller is switched on.
FMT10 can also be used with fan coils for sensitive-only cooling.
TEMPERATURE REGULATION
Using the knob, select the desired temperature; to increase, turn it
clockwise, and to decrease, turn anticlockwise.
The temperatures that can be set range from approximately 10°C to 30°C.
It is necessary for the water in the system to be at a suitable temperature.
VENTILATION SPEED
You can manually choose from a number of ventilation speeds:
Minimum speed:
LOW
Average speed: MED
Maximum speed: HIGH
WARMER
COOLER
OFF ON
LOW MED HIGH
WARMER
COOLER
OFF ON
LOW MED HIGH
WARMER
COOLER
OFF ON
LOW MED HIGH
WARMER
COOLER
OFF ON
LOW MED HIGH
2
4
1
3

AERMEC FMT 10 Specifications

General

Brand	AERMEC
Model	FMT 10
Category	Control Panel
Language	English