AERMEC FMT 20 AW User Manual

11
English
USE
“VENTILATION ONLY" mode
Use the key to select the Ventilation Only mode; the symbol will
appear on the display.
Using the key
, select the desired ventilation speed;
the set speed
, , and will appear on the display.
Choosing automatic management,
with the “VENTILATION ONLY”
mode set, the ventilation is fi xed at the maximum speed.
The VENTILATION ONLY mode allows for the working of the fan coil
even when the hydraulic system is switched off; in the event that cold
or hot water is circulating, the ventilation will be continuous and not
controlled by the thermostat.
1
2
VENTILATION SPEED
Press the button repeatedly to set the ventilation speed.
You can manually choose from a number of ventilation speeds:
Minimum speed:
Average speed:
Maximum speed:
Automatic management of the speed:
Choosing automatic management, the
ventilation speed is
automatically determined on the basis of the difference between the
temperature set and the room temperature.
1
VENTILATION
CONTINUOUS VENTILATION
THERMOSTAT-CONTROLLED VENTILATION
To choose between continuous ventilation and thermostat-controlled
ventilation
, press the button and, within three seconds, press
either one of the buttons
or .
CONTINUOUS VENTILATION
Do not use this setting in systems without water interception valves.
Choosing continuous ventilation with the fan set at a determined
ventilation speed, this remains active even when the set temperature is
reached.
If, on the other hand, the ventilation speed is in automatic management
mode, it will pass from one speed to another depending on the difference
between the temperature set and the room temperature. Once the set
temperature has been reached, the ventilation will still remain switched
on, at the minimum speed.
THERMOSTAT-CONTROLLED VENTILATION
Choosing thermostat-controlled ventilation with the fan set at a
determined ventilation speed, this switches off automatically when the set
temperature is reached.
If, on the other hand, the ventilation speed is in automatic management
mode, it will pass from one speed to another depending on the difference
between the temperature set and the room temperature. Once the desired
temperature is reached, the ventilation switches off automatically.
1
2
2

AERMEC FMT 20 AW Specifications

General

Brand	AERMEC
Model	FMT 20 AW
Category	Control Panel
Language	English