AERMEC Variable Multi Flow ANL Series - Auxiliary Connections by the Installer

20
18.03. 5719210_03
ANL / 290-650
EN

WARNING
Thefirststart-upmustbemadewithstand-
ardsettings;onlyaftercommissioningvary
theoperatingsetpoints.
Beforecommencingwiththestart-uppower
uptheunitforatleast12hoursplacingthe
circuitbreakerandthedoorinterlocked
isolatorintheONposition.Ensurethatthe
controlpanelisoff.
WARNING
Fortheinstallaonrefertotheelectricalwiring
schemacsprovidewiththeunit.Theelectrical
wiringschemacandmanualsmustbecarefully
conservedandmadeAVAILABLEFORFUTURE
REFERENCE.
PR3
C/F IA 230V
MAX 1A
TRA
TWS
1 2 3 4 5 6 7
TRA TWS
AE
 


 Heat/CoolControl
IA Auxiliaryswitch
AE Externalalarm
 Ambientthermostat
 Domestichotwaterthermostat
 Remotecontrolpanel(Accessory)