AERMEC Variable Multi Flow ANL Series - Location of Installation; Positioning

6
18.03. 5719210_03
ANL / 290-650
EN
 
Before proceeding with the installaon of the equip-
mentagreethelocaonwiththeclient,takingintoac-
countthefollowingpoints:
1. Thebasemustbeabletosupporttheweightofthe
unit.
2. The safe distances between the unit and other
equipmentorstructuresmustbestrictlyrespected
toensuretheintakeandoutletairisfreetocircu-
late.
3. Theequipmentmustbeinstalledbyacompetent
and qualied technician, in compliance with the
applicable naonal legislaon of the country of
desnaon, respecng the required minimum
maintenanceaccessspaces.
 
• Beforeliingtheunitverifytheliingcapability
oftheequipmentbeingused,takingintoaccount
theinformaonprovidedwiththepackaging.
• Whenliinginsertthroughtheunit'sbaseholes
liing bars (NOT PROVIDED) of sucient length
tolocatetheliingchainsandsafetylugs.
• Posion the unit in the place indicated by the
client, inserng between the unit's base and
the base support a rubber pad (minimum 10
mmthick)oran-vibraonmounts.Forfurther
informaonrefertothedimensionaltables.
• Securetheunitandensureitislevel;checkthat
sucient access is provided for hydraulic and
electricalconnecons. 
• In the case of installaon where gusts of wind
mayoccuradequatelysecuretheunit using ap-
propriatees.
WARNING:
Iftheunitisinstalledinparticularlywindy
locationstheprovisionofwindbarriers
maybenecessarytoavoidmalfunctions.
WARNING:
LiftingbarsareNOTprovided.