AERMEC Variable Multi Flow ANL Series - Product Identification; General Instructions for the Installer; Conservation of Documentation; Safety Instructions and Installation Standards

5
18.03. 5719210_03
ANL / 290-650
EN
 
TheEXTERNALaircooledchillersoftheANLserieswith
R410Ahavebeendesignedandmanufacturedtomeet
thecoolingneedsofsmallandmediumsystemsin
residentialorcommercialbuildings.
 
1. Submitthemanualwithallsupplementary
documentationtothesystemuserwhowillbe
responsiblefortheconservationofdocuments
sothattheycanbeavailablewhenneeded.
2. Readthismanualfully:allworksmustbecarried
outbyqualifiedpersonnel,inaccordancewith
anyapplicablecurrentlocalregulations.
3. Theequipmentwarrantydoesnotcoverany
costsassociatedwithliftingoraccessequip
-
mentnecessaryforwarrantyprocedures.
4. Donotmodifyortamperwiththeequipment
asthiscouldresultinaccidentsforwhichthe
manufacturerwillnotbeheldresponsible.The
warrantywillbevoidediftheabovementioned
warningsarenotrespected.
 

1. Theequipmentmustbeinstalledbyacompetent
andqualifiedtechnician,incompliancewiththe
applicablenationallegislationofthecountryof
destination.AERMECassumesnoresponsibility
foranylossesincurredbynotobservingthese
instructions.
2. Beforecommencinganyworksitisnecessary
to

.Allrelevantpersonnel
mustbemadeawareoftheproceduresand
possiblerisksthatmayariseatthetimeofinstal-
lationoftheunit.



NAMEPLATE
NAMEPLATE
NAMEPLATE
 
TheANLunitsareidentifiedby:
    
(withproductidencaondata).
    
(seegurebelow).