Laser Safety
CDRH Regulations
This equipment complies with requirements of 21 CFR subchapter J for class I laser products. This
equipment contains AlGaAs laser diode, 12 milliwatts, 775–790 nanometer wavelength for each
emitter. The beam divergence angle is 22 degrees (minimum) and 33 degrees (maximum) in the vertical
direction, and 6 degrees (minimum) and 12 degrees (maximum) in the horizontal direction, and laser
beams are generated in Continuous Wave (CW) mode.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in the manuals
might result in hazardous radiation exposure.
3. Information for This Machine
30
To Next Page
Loading...
