Aficio MP 301sp - Placing Originals; Placing Originals on the Exposure Glass (Mainly Asia); Placing Originals on the Exposure Glass (Mainly Europe)

Placing Originals
Placing Originals on the Exposure Glass (mainly Europe)
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1. Lift the ADF or the exposure glass cover.
2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be scanned.
CMS001
1
1
1. Positioning mark
3. Lower the ADF or the exposure glass cover.
Placing Originals on the Exposure Glass (mainly Asia)
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1. Lift the ADF.
2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be scanned.
2. Getting Started
52