17. Press [Program/Change Group], and then press [* Not Programmed].
18. Press [Group Name].
19. Enter the group name, and then press [OK].
20. Press [Available Other Functions].
21. Select which of the machine's functions you want to permit.
If the function you want to select is not displayed, press [ ].
Authentication will be applied to the selected functions.
Users can use the selected functions only.
For details about specifying available functions for individuals or groups, see p.80 "Limiting
Available Functions".
22. Press [OK] twice.
23. Press [Exit].
2. Configuring User Authentication
60
To Next Page
Loading...
