13
The Clock
Setting the time of day
Setting knob Adjusting knob
When the clock is rst connected the display will
ash (0.00) and ( ) alternately.
To set the clock to read
the time of day turn and
hold the Setting knob to
the clock symbol [ ] and
at the same time turn the
Adjusting knob left or right
until the clock shows the
time of day. .
Let go of the Setting knob and it will spring back to
the vertical [ ] oven manual setting.
If the key symbol [ ] appears on the left of the
display you have accidentally turned on the key
lock feature. See the section ‘Clock Special Features’.
To time something that’s cooking
(minute minder)
Turn the Setting knob
to the right to the [ ]
minute minder setting
- it should click into
position.
Use the adjustment
knob to set the time you
need.
You can turn the knob
back to the [ ] manual
setting to keep an eye
on the time of day
or leave it in the [ ]
minute minder position
as the time ticks down.
To stop the beeper when it sounds
Turn the Adjusting knob counter-clockwise
To stop automatically
Use when you have started the oven manually.
Turn the Setting knob to
the ( ) position.
Use the adjustment knob
to set the time you need.
‘Stop Time’ shows.
AUTO will show in the
display.
Turn the Setting knob to the (
) setting.
When your cooking is nished the beeper sounds.
Turn the Setting knob to the vertical [ ] to return
to manual cooking.
To start and stop the oven
automatically (delayed baking)
Before you set the clock, you must have two
numbers clearly in mind.
The ‘cook time’, which is the period of time you
want the oven to cook. The maximum cooking time
is 11 hours 59 minutes.
The ‘stop time’, which is the time of day you want
the oven to stop cooking. This must be less than 12
hours from the current time.
You cannot set a start time directly - this is set
automatically by setting the cooking period and
stop time.
Turn the Setting knob to
the [ ] position.
Use the Adjusting knob to
set the ‘cooking time’ you
need.
To Next Page
Loading...
Need help?
General
