AGCO Glencoe SS7400 Soil Saver - Table of Contents

Table of Contents
INTRODUCTION
DEALER/CUSTOMER INFORMATION
TO THE DEALER AND CUSTOMER ......................2
SAFETY
GENERAL OPERATION .............................3
DECAL INFORMATION AND LOCATION ....................5
CYLINDER LOCKUP OPERATION .......................9
OPERATION
TRACTOR AND SOIL SAVER

PREPARATION ...............11
HITCHING TO TRACTOR ...........................12
UNHITCHING FROM TRACTOR, UNFOLDING AND FOLDING WINGS ...14
TRANSPORTING THE IMPLEMENT ......................14
PREPARATION, TILLING, DEPTH, SPEED, SLICERS ............15
RESIDUE MANAGEMENT PLANNING.....................16
RESIDUE CHARTS ...............................17
MEASURING CROP RESIDUE ........................18
ADJUSTMENTS
LEVELING , SHANK ADJUSTMENTS .....................19
SLICER DEPTH ADJUSTMENTS .......................20
SHANK CLAMPTYPES .............................21
OPTIONS
SPIKE TOOTH HARROW, LEVELER .....................22
GROUND TOOLS, SHANK EXTENSIONS ...................23
SERVICE
GENERAL MAINTENANCE ..........................25
LUBRICATION CHART, BOLT TORQUE CHECKING INTERVAL .......26
WHEELS, SLICER GANGS...........................27
HYDRAULIC SYSTEM, CHARGING/PURGING, CYLINDER STROKE ....28
HYDRAULIC SYSTEM PLUMBING-RIGID MODELS .............30
HYDRAULIC SYSTEM PLUMBING-FOLDING MODELS ...........31
TRANSPORT LIGHTING WIRING DIAGRAM .................32
TROUBLESHOOTING .............................33
SHANK LOCATIONS ..............................34
SPECIAL TORQUE VALUES ..........................37
SS7400 SPECIFICATIONS
i