AGFA CR 35-X - Operating modes

20
4454C EN 2013-05-14Operating modes
CR 35-X DIGITIZER
Operating modes
The CR 35-X can be operated in three modes: operator mode, key-operator
mode, and service mode.
Operator mode
The operator mode groups all basic functions which are aimed at
radiographers:
• Reading an image plate;
• Reading an emergency image plate;
• Re-erasing an image plate;
• Reading the identification data of a cassette (Dedicated configuration only);
• Changing the image plate type (Dedicated configuration only).
All functions of the operator mode are described in Chapter 2, ‘Basic operation
(‘Operator mode’)’.
Key-operator mode
The key-operator mode groups advanced functions which are aimed at
technicians.
The key-operator mode can be accessed via the Key-operator key on the
keypad and is menu-driven. The key-operator functions are described in
Chapter 3, ‘Advanced operation (‘Key-operator mode’)’.
Service mode
The service mode functions are reserved for trained service personnel. They
are password protected.