38
4454C EN 2013-05-14Switching on the CR 35-X
CR 35-X DIGITIZER
The machine starts a self-test which may take up to 3 minutes. The following screen
is displayed:
If the CR 35-X has completed the self-test successfully, the CR 35-X enters the opera-
tor mode and displays the operator main screen:
Note: During the self-test, you cannot activate any functions.
Note: Notes provide advice and highlight unusual points. A note is not
intended as an instruction.
Note: If the CR 35-X displays the following message, contact your local
service organization.
ERROR
Self test failed
SERVICE XXXXX
To Next Page
Loading...
