49
4454C EN 2013-05-14 Reading an emergency image plate
CR 35-X DIGITIZER
• The status indicator at the top of the CR 35-X must be green and be lit constantly.
3 Press the Emergency key on the keypad.
The display will read:
Note: The CR 35-X is operational if the status field equals ‘READY’, even if
status messages of the destination are shown (e.g. ‘QS not ready’).
WARNING: The emergency status will only be assigned to the first
image plate which you insert into the CR 35-X cassette slot after
pressing the Emergency key.
READY
EMERGENCY
WARNING
Next cassette gets emergency status
To Next Page
Loading...
