186
Chapter 3 Features and Functions
Remote Interface Configuration
3
Agilent 33500 Series Web Interface
The Agilent 33500 Series provides a web interface resident in the
instrument. You can use this interface over the LAN to view and modify
the instrument’s I/O configuration. Also, a remote front panel interface is
provided, which allows you to control the instrument over the network.
To access and use the web interface:
1. Ensure that your PC includes Microsoft Internet Explorer version 6.0
or later and Java Virtual Machine (JVM).
2. Establish LAN interface connectivity from your PC to the 33500
Series.
3. Open your PC’s Internet Explorer.
4. To launch the web interface enter the IP address of the instrument, or
its fully qualified host name, in the browser address field.
5. Follow the directions in the web interface’s online help.
USB Configuration
There are no USB configuration parameters to configure. You can
retrieve the USB ID string (set by the manufacturer) by using the Show
USB Id feature:
• Front panel operation: Press and press the I/O Config softkey.
Select USB Settings and Show USB Id. The USB string appears on
the screen, and the longest string of digits is the instrument’s serial
number.
• There is no SCPI command to display the USB ID.
To Next Page
Loading...
Need help?
General
