1 Introduction
28 5977B Series MSD Operating Manual
Safety and Regulatory Certifications
The 5977B Series MSD conforms to the following safety standards:
• Canadian Standards Association (CSA): CAN/CSA-C222 No. 61010-1-04
• CSA/Nationally Recognized Test Laboratory (NRTL): UL 61010–1
• International Electrotechnical Commission (IEC): 61010–1
• EuroNorm (EN): 61010–1
The 5977B Series MSD conforms to the following regulations on
Electromagnetic Compatibility (EMC) and Radio Frequency Interference (RFI):
• CISPR 11/EN 55011: Group 1, Class A
• IEC/EN 61326
• AUS/NZ
This ISM device complies with Canadian ICES-001. Cet appareil ISM est
conforme a la norme NMB—001 du Canada.
The 5977B Series MSD is designed and manufactured under a quality system
registered to ISO 9001.
The 5977B Series MSD is RoHS compliant.
Information
The Agilent Technologies 5977B Series MSD meets the following IEC
classifications: Equipment Class I, Laboratory Equipment, Installation
Category II, Pollution Degree 2.
This unit has been designed and tested in accordance with recognized safety
standards. It is designed for use indoors. If the instrument is used in a manner
not specified by the manufacturer, the protection provided by the instrument
may be impaired. Whenever the safety protection of the MSD has been
compromised, disconnect the unit from all power sources, and secure the unit
against unintended operation.
Refer servicing to qualified service personnel. Substituting parts or
performing any unauthorized modification to the instrument may result in a
safety hazard.
To Next Page
Loading...
Need help?
General
