29
Agilent 5977B Series MSD
Operation Manual
Agilent Technologies
2
Installing GC Columns
Columns 30
To Install a Capillary Column in a Split/Splitless Inlet 33
To Condition a Capillary Column 36
To Install a Capillary Column in the GC/MS Interface Using the
Self-Tightening Column Nut 37
To Install a Capillary Column in the GC/MS Interface Using a Standard
Column Nut 42
Before you can operate your GC/MSD system, you must select, install, and
condition a GC column. This chapter shows you how to install and condition a
column. For correct column and flow selection, you must know what type of
vacuum system your MSD has.
To Next Page
Loading...
