Overview 1
Help for data analysis
Agilent 6400 Series Triple Quad LC/MS Concepts Guide 11
Acquire data
• Enter sample information and pre- or post-analysis programs
(scripts) and run single samples interactively
A worklist is a list of individual
samples and batches
(sequences) that you enter
and run automatically with
the Data Acquisition program.
• Enter and automatically run both individual samples and
samples organized in a
worklist (sequence of samples)
• Set up pre- and post-analysis scripts to run between samples
in a worklist
• Set up and run a worklist to optimize MS acquisition
parameters
• Print a worklist report
• View system events, including start and stop times, run
events and errors and print an event log report
Help for data analysis
Quantitative Analysis Program
Agilent has designed the quantitative analysis program to help
quantitate very low amounts of material with the following
unique features:
• Imports information directly from the acquisition method
• Provides a curve-fit assistant to test all fits and statistics on
curve quality
• Integrates with an automated, parameter-free integrator that
uses a novel algorithm, optimized for triple quadrupole data
• Presents a Batch-at-a-Glance results window to help you
review and operate on an entire batch of data at once
• Automatically detects outliers
• Provides preconfigured templates for basic reporting and
enables the capability to create custom reports in Microsoft
Excel
Please refer to the Agilent MassHunter Workstation Software -
Quantitative Analysis Familiarization Guide or the online
Help for the Quantitative Analysis program.
To Next Page
Loading...
