Quick Reference 25
Description
Not Ready Lights when the GC is not yet ready to pro-
cess a sample and blinks when a fault occurs.
Press [Status] to see which parameters are
not ready or what faults have occurred.
Run Lights when the instrument is executing a
chromatographic run.
Remote Lights when the GC is communicating with a
remote device (such as the Agilent ChemSta-
tion running on a PC). When lit, some func-
tions are blocked from the keypad because
they are being controlled by the remote
device.
Clock Table Lights when a clock table event has been set.
See “Method Storage and Automation Keys”
on page 20 for more details on Clock Table
events.
Gas Saver Lights when the front or back gas saver is on.
Run Log Lights when a run log has entries. Press
[Logs] to view these entries. This information
can be used for Good Laboratory Practice
(GLP) standards.
Service Due Lights when a service counter has reached
the limit you specified.
Pre Run Lights when the GC is in the pre-run state
(after [Prep Run] is pressed). Indicates that
the inlet has been prepared for injection.
Oven Ramp
Rate
Final Temp
Lights indicate the progress of the oven tem-
perature program.
• blinks if the oven is unable to follow the
oven temperature program.
• is lit when the GC reaches the tempera-
ture specified in the method.
Post Run Lights when the instrument is executing a
post-run operation (e.g., printing a report).
To Next Page
Loading...
