Making Measurements 4
Agilent 1000B Series Oscilloscopes User’s Guide 103
Vmin (Minimum Voltage)
The minimum amplitude. The most negative peak voltage measured over
the entire waveform. See Figure 40 on page 102.
Vpp (Peak-to-Peak Voltage)
Peak- to- peak voltage. See Figure 40 on page 102.
Vtop (Top Voltage)
Voltage of the waveform's flat top, useful for square and pulse waveforms.
See Figure 40 on page 102.
Vbase (Base Voltage)
Voltage of the waveform's flat base, useful for square and pulse
waveforms. See Figure 40 on page 102.
Vamp (Amplitude Voltage = Vtop - Vbase)
Voltage between Vtop and Vbase of a waveform. See Figure 40 on
page 102.
Vavg (Average Voltage)
The arithmetic mean over the entire waveform.
To Next Page
Loading...
Need help?
General
