Oscilloscope Utility Settings 6
Agilent 1000B Series Oscilloscopes User’s Guide 133
Displaying System Information
To display the oscilloscope’s system information:
1 Press [Utility].
2 In the Utilities menu, press System Info.
The system information contains:
• Model number.
• Serial number.
• Software version.
• Installed module information.
To exit, press Run/Stop.
Turning Sound ON or OFF
To turn the oscilloscope’s beeper sound on or off:
1 Press [Utility].
2 In the Utilities menu, press Sound to toggle between on and off.
Appears on the menu when sound is off; press Sound to
run the test.
Appears on the menu when sound is on; press Sound to
stop the test
To Next Page
Loading...
Need help?
General
