Agilent Technologies DSO1002A User Manual

Displaying Data 2
Agilent 1000B Series Oscilloscopes User’s Guide 49
To specify a bandwidth limit
When high frequency components of a waveform are not important to its
analysis, the bandwidth limit control can be used to reject frequencies
above 20 MHz. See Figure 19 and Figure 18.
1 If the channel’s menu is not currently displayed, press the channel key
([1], [2], [3], or [4]).
2 In the Channel menu, press BW Limit to toggle the bandwidth limit
setting “ON” and “OFF”.
Figure 18 BW Limit Control OFF
Bandwidth limit OFF

Agilent Technologies DSO1002A Specifications

General

Brand	Agilent Technologies
Model	DSO1002A
Category	Test Equipment
Language	English