Agilent Technologies E3634A - Page 91

Chapter 4 Remote Interface Reference
Output Setting and Operation Commands
78
VOLTage:RANGe?
This query returns the currently selected range. The returned parameter for the Agilent
E3633A is ‘‘P20V’’ (HIGH) or ‘‘P8V’’ (LOW) and the parameter for the Agilent
E3634A is ‘‘P50V’’ (HIGH) or ‘‘P25V’’ (LOW).
MEASure:CURRent?
This command queries the current measured across the current sense resistor inside
the power supply.
MEASure[:VOLTage]?
This command queries the voltage measured at the sense terminals of the power
supply.