Agilent Technologies E3640A - Device Specific Commands; Non-SCPI Commands

Chapter 4 Remote Interface Reference
SCPI Conformance Information
111
4
Device Specific Commands
The following commands are device-specific to your power supply. They are
not included in the ‘1997.0’ version of the SCPI standard. However, these
commands are designed with the SCPI standard in mind and they follow all of
the command syntax rules defined by the standard.
Non-SCPI Commands
APPLy {<voltage>|DEF|MIN|MAX>}[,{<current>|DEF|MIN|MAX}]
APPLy?
CALibration
:COUNt?
:CURRent[:DATA] <numeric value>
:CURRent:LEVel {MIN|MID|MAX}
:SECure:CODE <new code>
:SECure:STATe {OFF|ON},<code>
:SECure:STATe?
:STRing <quoted string>
:STRing?
:VOLTage[:DATA] <numeric value>
:VOLTage:LEVel {MIN|MID|MAX}
:VOLTage:PROTection
OUTPut
:RELay[:STATe] {OFF|ON}
:RELay[:STATE]?
SYSTem
:LOCal
:REMote
:RWLock