ESG Family Signal Generators Hardkey and Softkey Reference
Sweep/List
User’s Guide 4-101
Goto Middle Row
Press this softkey to move the selection bar to the middle row of list
sweep points when you are in the Goto Row menu that is accessed from
the Configure List Sweep menu. If you are in the Goto Row menu that
is accessed from the Load/Store menu, the selection bar moves to the
middle row of the catalog of list files.
Softkey Location:
Sweep/List >Configure List Sweep > Goto Row >
Goto Middle Row
Or: Sweep/List > Configure List Sweep > Load/Store > Goto Row >
Goto Middle Row
Goto Row
Pressing this softkey reveals a menu of softkeys that help you move the
selection bar through the rows of list sweep points when you are in the
Configure List Sweep menu. If you are in the Load/Store menu, the
softkeys help you move the selection bar through the catalog of list files.
You can also go to a specific row by rotating the front panel knob, using
the up and down arrow keys, or entering the row number with the
numeric keypad. Once the desired row number is displayed, press the
Enter terminator softkey.
Softkey Location:
Sweep/List > Configure List Sweep > Goto Row
Or: Sweep/List > Configure List Sweep > Load/Store > Goto Row
Goto Top Row
Press this softkey to move the selection bar to the top row of list sweep
points when you are in the Goto Row menu that is accessed from the
Configure List Sweep menu. If you are in the Goto Row menu that is
accessed from the Load/Store menu, the selection bar moves to the top
row of the catalog of list files.
Softkey Location:
Sweep/List > Configure List Sweep > Goto Row >
Goto Top Row
Or: Sweep/List > Configure List Sweep > Load/Store > Goto Row > Goto Top Row
To Next Page
Loading...
Need help?
General
