ESG Family Signal Generators Hardkey and Softkey Reference
Utility
User’s Guide 4-117
Deselect All Items
Press this softkey to deselect all options in the list of hardware options.
Selected options show an X in the column to the left of the option
number. Deselected options have no X. Only those options that are
selected can be enabled or calibrated.
Softkey Location:
Utility > Instrument Adjustments > Hardware Options >
Deselect All Items
Deselect Item
Press this softkey to deselect the highlighted option in the list of
hardware options. Selected options show an X in the column to the left
of the option number. Deselected options have no X. Only those options
that are selected can be enabled or calibrated.
Softkey Location:
Utility > Instrument Adjustments > Hardware Options >
Deselect Item
Diagnostic Info
Press this softkey for a display of diagnostic information about the
signal generator. The following information is included in the display:
• instrument model
• instrument options
• instrument serial number
• current firmware revision
• current firmware date
• number of hours the signal generator has been powered on
• number of hours the display has been lit
• number of power cycles
• number of attenuator cycles
• number of reverse power protection trips
Softkey Location:
Utility > Instrument Info/Help Mode > Diagnostic Info
Display
Pressing this softkey reveals a menu of choices for adjusting and testing
the display. In this menu you are able to set up the screen saver, change
the display brightness, and perform black and white pixel screen tests.
Softkey Location:
Utility > Display
To Next Page
Loading...
Need help?
General
