Chapter 4
Front-Panel Key and SCPI Command Reference
Measure
165
Front-Panel Key and SCPI Command
Reference
4.3.10 Modulation SINAD
Allows the user to switch to the Modulation SINAD measurement.
4.3.10.1 SCPI Remote Commands
:CONFigure:MODSinad
:INITiate:MODSinad
:FETCh:MODSinad[n]?
:MEASure:MODSinad[n]?
:READ:MODSinad[n]?
Mode: MRECEIVE
Key Path:
Measure, More
Remote Command: :CONFigure:MODSinad
Notes: This key invokes Modulation SINAD Measurement.
Example: :CONF:MODS
Index: n
<Mnemonic>
Results Returned
0 Returns unprocessed I/Q trace data, as a series of comma-separated trace points, in volts. The I
values are listed first in each pair, using the 0 through even-indexed values. The Q values are the
odd-indexed values.
not specified
or n = 1
Returns comma-separated scalar results, in the following order:
Return Modulation SINAD (dB or % depending on Display Units)
Return Modulation SINAD Ratio(–999.0 in Normal mode; in Ratio mode, dB or % depending on
Ratio Mode setting)
Ratio Reference SINAD (dB or % depending on Display Units)
Return Modulation Distortion(%)
To Next Page
Loading...
Need help?
General
