Chapter 1 37
Introduction
Installing Optional Measurement Personalities
Using the Delete License Key on PSA
This key will make the option unavailable for use, but will not delete it from
memory. Write down the 12-digit license key for the option before you delete it. If
you want to use that measurement personality later, you will need the license key
to reactivate the personality firmware.
NOTE Using the Delete License key does not remove the personality from the instrument
memory, and does not free memory to be available to install another option. If you
need to free memory to install another option, refer to the instructions for loading
firmware updates located at:
http://www.agilent.com/find/psa/
1. Press
System, More, More, Licensing, Option. Pressing the Option key will
activate the alpha editor menu. Use the alpha editor to enter the letters
(upper-case) and the front-panel numeric keyboard to enter the digits (if
required) for the option, then press the
Enter key. As you enter the option, you
will see your entry in the active function area of the display.
2. Press
Delete License to remove the license key from memory.
Ordering Optional Measurement Personalities
When you order a personality option, you will receive an entitlement certificate.
You will need to go to the website to redeem your entitlement certificate for a
license key. You will need to provide your instrument serial number and host ID,
and the entitlement certificate number.
Required Information: Front Panel Key Path:
Model #: (Ex. E4440A)
Host ID:
__________________
System, Show System
Instrument
Serial Number:
__________________
System, Show System
To Next Page
Loading...
Need help?
General
