Chapter 4
Front-Panel Key and SCPI Command Reference
Measurement keys
171
Front-Panel Key and SCPI Command
Reference
4.4.1.1 AMPLITUDE/Y Scale
The AMPLITUDE/Y Scale key accesses the menu to set the desired vertical scale and associated settings:
NOTE Default setting numbers are independent for each window.
When you select Frequency Counter Settings Window and press AMPLITUDE/Y Scale key, a
blank Y Scale menu will display.
4.4.1.1.1 Display Mode
Sets the display mode.
4.4.1.1.2 Display Unit
Sets the unit for Normal display mode.
Mode: MRECEIVE
Key Path:
Amplitude/Y Scale
Remote Command: :DISPlay:FCOunter:MODE NORMal|RATio
:DISPlay:FCOunter:MODE?
Preset: NORMal
State Saved: Saved in instrument state.
Range: Normal | Ratio
Dependencies/Couplings: No
Example: :DISP:FCO:MODE NORM
:DISP:FCO:MODE?
Mode: MRECEIVE
Key Path:
Amplitude/Y Scale
Remote Command: :DISPlay:FCOunter:UNIT HZ|KHZ|MHZ|GHZ
:DISPlay:FCOunter:UNIT?
Preset: HZ
State Saved: Saved in instrument state.
Range: Hz|kHz|MHz|GHz
Example: :DISP:FCO:UNIT GHZ
:DISP:FCO:UNIT?
To Next Page
Loading...
Need help?
General
