32 Chapter 1
Introduction
Installing Optional Measurement Personalities
To see the size of your installed memory for PSA Series Spectrum Analyzers:
1. Ensure that the spectrum analyzer is in spectrum analyzer mode because this
can affect the screen size.
2. Press
System, Show System. Under Options look for 115.
3. Press
System, More, Show Hdwr.
4. Read Flash Memory size in the table.
If you have 48 MBytes of memory, and you want to install more than 3 optional
personalities, you may need to manage your memory resources. The following
section, “How to Predict Your Memory Requirements” on page 33, will help you
decide how to configure your installed options to provide optimal operation.
PSA Flash
Memory Size
Available Memory
Without Option B7J
and Option 122 or 140
Available Memory With Option B7J
and Option 122 or 140
64 Mbytes 32.5 MBytes 30.0 MBytes
48 Mbytes 16.9 MBytes 14.3 MBytes
PSA Compact Flash
Memory Size
Available Additional Memory for Measurement
Personalities
512 Mbytes (Option 115) 512 MBytes
To Next Page
Loading...
Need help?
General
